Petal Metallic Finish
Add an exotic look to your home with Petal Metallic Finish. When sprayed on any surfaces its sparking mist will instantly electrify the appearance. Petal Metallic Finish give you subtle transition from a plain dull appearance to an exotic sparking decor.
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, ROLLER, SPRAY
DILUTION
Mineral Turpentine
DRYING TIME
4-16 Hours
RECOAT TIME
AT AN INTERVAL OF 12-16 HOURS
COVERAGE
13-15(m2/l)
SHADE
ALL COLORS FROM SHADE CARD
PACKAGING
0.91 LTR, 3.64 LTR, 14.56 LTR
M268
Champagne
M261
Sparkling Silver
M266
Petal Blue
M267
Shiny Green
M263
Brown Sheen
M269
Ocean Blue
M270
Jeep Green
M264
Copper
M271
Maroon
M265
Violet
M272
Black Pearl
M262
Golden Dust
SURFACE PREPARATION:
Pre-Primed or on smooth surface, ensure that surface is clean, dry and free from rust dust, grease, Oil and other contamination
REOMMENDED USE:
Recommended for exterior/interior use on plaster, concrete, gypsum, brickwork and asbestos surfaces where long lasting and washable finish is required.
| TECHNICAL DATA | |
|---|---|
| Colour | Standard Colour Range |
| Finish | Gloss |
| Solids (Vol %)* | 43 ± 2 |
| Flash Point | > 34 °C |
| Special Gravity | 0.90 – 1.15 |
| Film Thickness | 15 to 30 microns dft |
| Theoretical spreading rate | 13-15 (m²/l) |
| APPLICATION | |
|---|---|
| Application Methods: | Brush, Roller, Spray |
| Cleaning: | Mineral Turpentine |
| Thinning: | 15% to 20% Mineral Turpentine |
| DRYING TIME | |||
|---|---|---|---|
| Temperature | Dry to touch | Dry to Handle | Re-coating time |
| 25 °C | 3 hours | 8 hours | 8 hours |
| 35 °C | 6 hours | 12 hours | 12 hours |
TDS
