Petal Mark Silk Emulsion
Petal Mark Silk Emulsion is based on PVA polymer binder which gives good flow and smooth Matt finish.
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, ROLLER, SPRAY
DILUTION
Water
DRYING TIME
0.5-2 Hours
RECOAT TIME
AT AN INTERVAL OF 2 HOURS
COVERAGE
11-15 (m2/l)
SHADE
ALL COLORS FROM SHADE CARD
PACKAGING
0.91 LTR, 3.64 LTR, 14.56 LTR
SURFACE PREPARATION:
All loose material including loose plaster, cement splashes, old paint, dust, etc. must be thoroughly removed. New plaster/concrete must be fully cured.
REOMMENDED USE:
Recommended for use on plaster, concrete, gypsum, brickwork and asbestos surfaces. This product is recommended for interior use only.
| TECHNICAL DATA | |
|---|---|
| Colour | Standard Colour Range |
| Finish | Matt |
| Solids (Vol %)* | 44 ± 2 |
| Flash Point | N/A Water Based |
| Special Gravity | 1.40 – 1.60 |
| Film Thickness | 30 microns dft |
| Theoretical spreading rate | 11-15 (m²/l) |
APPLICATION:
| Application Methods: | Brush, Roller, Spray |
| Cleaning: | Clean Water |
| Thinning: | 50% to 70% With Clean Water |
DRYING TIME:
| Temperature | Dry to touch | Dry to Handle | Re-coating time |
|---|---|---|---|
| 25 °C | 30 minutes | 2 hours | 3 hours |
| 35 °C | 15 minutes | 1 hours | 2 hours |
TDS
Shade Card
