Petal Wall Putty
Petal Wall Putty is designed to fight out alkali moisture problems present in new or old masonry surfaces. The tough and flexible film of the binder discourages the penetration of moisture and salt and thus providing maximum protection to special Plastic Emulsion and Special Emulsion applied.
PRODUCT INFORMATION
METHOD OF APPLICATION
Putty Knife / Trowel / Scraper
DILUTION
Water
DRYING TIME
2-4 Hours
RECOAT TIME
AT AN INTERVAL OF 3-4 HOURS
COVERAGE
4-5 m2/kg/coat
SHADE
WHITE
PACKAGING
1.25 KG, 5 KG, 20 KG
SURFACE PREPARATION:
All loose material including loose plaster, cement splashes, Old paint, dust, etc. must be thoroughly removed. New plaster/ concrete must be fully cured.
REOMMENDED USE:
To fill pores and Imperfections Of plaster, concrete and gypsum surfaces. The product is easy to apply with applicator and provides ideal finish for subsequent coats
| TECHNICAL DATA | |
|---|---|
| Colour | White |
| Finish | Matt |
| Solids (Vol %)* | 42 ± 2 |
| Flash Point | N/A Water Based |
| Special Gravity | 1.50 |
| Film Thickness | 100 to 500 microns |
| Theoretical spreading rate | 4-5 (m²/kg/coat) |
APPLICATION:
| Application Methods: | Putty Knife / Trowel/ Scraper |
| Cleaning: | Clean Water |
| Thinning: | Ready to Use |
DRYING TIME:
| Temperature | Dry to touch | Dry to Handle | Re-coating time |
|---|---|---|---|
| 25 °C | 2 hours | 4 hours | 4 hours |
| 35 °C | 1 hour | 3 hours | 3 hours |
TDS
