Petal Stain Away
Petal Stain Away (Aqueous Matt Finish) product is superior quality emulsion paint, designed for interior surfaces. Based on pure acrylic emulsion.
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, ROLLER, SPRAY
DILUTION
Water
DRYING TIME
3-24 Hours
RECOAT TIME
AT AN INTERVAL OF 3-4 HOURS
COVERAGE
13-15 (m2/l)
SHADE
ALL COLORS FROM SHADE CARD
PACKAGING
1 LTR, 4 LTR, 16 LTR
557
Black
600
Brilliant White
651
Pacific Ocean
636
Plum
652
Emerald
637
Mauve
653
Peacock
638
Sherbat
654
Orchard Lane
639
Apple Green
655
Parasol
640
Crystal
656
Royal Purple
641
Bamboo Shoot
642
Flag Green
643
Ice Age
644
Polar Adventure
645
Sky Blue
646
Flamingo
647
Royal Blue
648
Lime
649
Flora Green
650
Sea Blue
619
African Orange
635
Salsa
620
Copper Tone
621
Ivory
622
Cockleshell
623
Cameo
624
Baby Pink
625
Pink Lady
626
Rose Petal
627
Cherry Blossom
628
Deep Pink
629
Prime Rose
630
Iris
631
Sweet Asyllum
616
Almond
632
Carnival Pink
617
Brazil Nut
633
Rose Velvet
618
Apricot
634
Tile Red
603
Buff Grey
604
Smoky Wings
605
Beaver
606
Ash White
607
Hearth Yellow
608
Lemon Sorbit
609
Banana Ripple
610
Mango Mood
611
Sweet Cream
612
Rose White
613
Kitten White
614
Soft Peach
615
Sweet Jewel
602
Dove White
601
Off White
SURFACE PREPARATION:
Remove all loose, defective paint or powdery residues, loose chalk, dust and foreign matter. Repair cracks, uneven surfaces with Multi-purpose Joint Compound or suitable fillers. Smoothen the putty filler areas with sand paper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high.
REOMMENDED USE:
Recommended for exterior/interior use on plaster, concrete, gypsum, brickwork and asbestos surfaces where long lasting and washable finish is required.
| TECHNICAL DATA | |
|---|---|
| Colour | Standard Colour Range |
| Finish | Slight Sheen |
| Solids (Vol %)* | 41 ± 5 |
| Flash Point | N/A Water Based |
| Special Gravity | 1.35 – 1.45 |
| Film Thickness | 20 to 35 microns dft |
| Theoretical spreading rate | 13-15 (m²/l) |
APPLICATION:
| Application Methods: | Brush, Roller, Spray |
| Cleaning: | Clean Water |
| Thinning: | 20% to 30% With Clean Water |
DRYING TIME:
| Temperature | Dry to touch | Dry to Handle | Re-coating time |
|---|---|---|---|
| 25 °C | 3 hours | 24 hours | 4 hours |
| 35 °C | 2 hours | 20 hours | 3 hours |
TDS
Shade Card
