Petal Mark Smooth Wall Putty
Petal Mark Smooth Wall Putty is heavily pigmented VA based filler for surface preparation.
PRODUCT INFORMATION
METHOD OF APPLICATION
Putty Knife / Trowel / Scraper
DILUTION
Water
DRYING TIME
2-3 Hours
RECOAT TIME
AT AN INTERVAL OF 3-4 HOURS
COVERAGE
4-5 m2/kg/coat
SHADE
WHITE
PACKAGING
5 KG, 20 KG
SURFACE PREPARATION:
All loose material including loose plaster, cement splashes, Old paint, dust, etc. must be thoroughly removed. New plaster/ concrete must be fully cured.
REOMMENDED USE:
To fill pores and Imperfections Of plaster, concrete and gypsum surfaces. The product is easy to apply with applicator and provides ideal finish for subsequent coats.
CONDITION DURING APPLICATION:
The temperature of the substrate should be min. 30C above the dew point of the air temperature and relative humidity not more than 70% measured in the vicinity of the substrate. Good ventilation is necessary when the paint is used in confined spaces. Mix the paint to uniform consistency before a application.
| TECHNICAL DATA | |
|---|---|
| Colour | White |
| Finish | Matt |
| Solids (Vol %)* | 42 ± 2 |
| Flash Point | N/A Water Based |
| Special Gravity | 1.50 |
| Film Thickness | 100 to 500 microns |
| Theoretical spreading rate | 4-5 (m²/kg/coat) |
APPLICATION:
| Application Methods: | Putty Knife / Trowel/ Scraper |
| Cleaning: | Clean Water |
| Thinning: | Ready to Use |
DRYING TIME:
| Temperature | Dry to touch | Dry to Handle | Re-coating time |
|---|---|---|---|
| 25 °C | 2 hours | 3 hours | 4 hours |
| 35 °C | 1 hour | 2 hours | 3 hours |
TDS
