Petal High Gloss Enamel
Petal High Gloss Enamel is top quality oil based enamel made from high quality pigments and resin. It produces a hard, durable glossy finish and maximum gloss retention. It has excellent brush-ability and opacity. It can be scrubbed hard. It is suitable for both Interior and exterior use. It gives mirror like Premium Gloss
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, ROLLER, SPRAY
DILUTION
Mineral Turpentine
DRYING TIME
4-16 Hours
RECOAT TIME
AT AN INTERVAL OF 12-16 HOURS
COVERAGE
13-15(m2/l)
SHADE
ALL COLORS FROM SHADE CARD
PACKAGING
250 ML, 0.91 ML, 3.64 ML, 14.56 ML
200
Brilliant White
223
Royal Blue
222
Navy Blue
243
Black
233
Emerald
259
Forest Green
289
Light Blue
258
Signal Green
236
Spring Green
220
Vivid Blue
290
Feroza
242
Royal Green
221
Middle Blue
230
Violet
234
Scarab
254
Sea Green
255
Adam Green
235
Eau-De-Nill
229
Mauve
209
Hot Pink
260
Coriander
291
Hopsack
204
Lemon
248
Light Grey
226
Golden Brown
228
Dark Brown
214
Diyar
205
Golden Yellow
216
Clay
295
D. Brown
224
Champagne
215
Pale Cream
210
Orange
283
Antilope
240
Smoke Grey
249
Petal Brown
256
Ochre
241
Dark Grey
227
Red Oxide
288
Pumice
257
Polish Brown
212
P.O. Red
287
Ash White
208
Peach
206
Crimson
202
Bone White
213
Petal Beige
286
Oyster
246
Sheesham
294
Red Oxide
252
Cream
282
Beige
201
Off White
293
Early Dawn
296
Petal Ash White
211
Signal Red
SURFACE PREPARATION:
Pre-Primed or on smooth surface, ensure that surface is clean, dry and free from rust dust, grease, Oil and other contamination
REOMMENDED USE:
Recommended for exterior/interior use on plaster, concrete, gypsum, brickwork and asbestos surfaces where long lasting and washable finish is required.
| TECHNICAL DATA | |
|---|---|
| Colour | Standard Colour Range |
| Finish | Gloss |
| Solids (Vol %)* | 43 ± 2 |
| Flash Point | > 34 °C |
| Special Gravity | 0.90 – 1.15 |
| Film Thickness | 15 to 30 microns dft |
| Theoretical spreading rate | 13-15 (m²/l) |
| APPLICATION | |
|---|---|
| Application Methods: | Brush, Roller, Spray |
| Cleaning: | Mineral Turpentine |
| Thinning: | 15% to 20% Mineral Turpentine |
| DRYING TIME | |||
|---|---|---|---|
| Temperature | Dry to touch | Dry to Handle | Re-coating time |
| 25 °C | 4 hours | 16 hours | 16 hours |
| 35 °C | 3 hours | 12 hours | 12 hours |
TDS
