Petal Under Coat Red Oxide
Petal Under Coat Red Oxide is a high-quality air drying anti-corrosive most suitable for metal surfaces as a base coat for air-drying enamels.
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, SPRAY
DILUTION
Mineral Turpentine
DRYING TIME
3 – 24 Hours
RECOAT TIME
AT AN INTERVAL OF 10 HOURS
COVERAGE
18 (m2/l/coat)
SHADE
RED OXIDE
PACKAGING
250 ML, 3.64 LTR, 14.56 LTR
SURFACE PREPARATION:
All loose material including loose paint should be thoroughly removed. Wire brushing to standard St.2 is recommended. Ensure surface is dry, clean and free from rust, dust, Oil and contaminants.
REOMMENDED USE:
A general purpose primer for interior / exterior use on steel Structures
| TECHNICAL DATA | |
|---|---|
| Colour | Red Oxide |
| Finish | Matt |
| Solids (Vol %)* | 55 ± 2 |
| Flash Point | > 34 °C |
| Special Gravity | 1.30 – 1.50 |
| Film Thickness | 16 to 30 microns dft |
| Theoretical spreading rate | 18 (m²/l/coat) |
| APPLICATION | |
|---|---|
| Application Methods: | Brush, Spray |
| Cleaning: | Mineral Turpentine |
| Thinning: | 15% to 20% Mineral Turpentine |
| DRYING TIME | |||
|---|---|---|---|
| Temperature | Dry to touch | Dry to Handle | Re-coating time |
| 25 °C | 3 hours | 24 hours | 12 hours |
| 35 °C | 2 hours | 20 hours | 10 hours |
TDS
